Need help?Do you have a question about the HIKVISION DS-7608NI-K2/8P/4G and is the answer not in the manual?
General| Model | DS-7608NI-K2/8P/4G |
|---|---|
| Category | Network Hardware |
| Channel Input | 8 |
| Max. Incoming Bandwidth | 80 Mbps |
| Max. Outgoing Bandwidth | 80 Mbps |
| Video Compression | H.265+/H.265/H.264+/H.264 |
| HDMI Output | 1 |
| VGA Output | 1 |
| Audio Output | 1 |
| HDD Bays | 2 |
| HDD Interface | SATA |
| Alarm In/Out | 4/1 |
| Power over Ethernet (PoE) | Yes |
| PoE Standard | IEEE 802.3af/at |
| 4G Module | Yes |
| Operating Humidity | 10% to 90% |
| Decoding Format | H.265/H.264 |
| Max HDD Capacity | 10 TB per HDD |
| Network Interface | 1 x 10/100/1000 Mbps |
| USB Interface | 2 USB 2.0 |
| PoE Interface | 8 |
| Operating Temperature | -10°C to 55°C |
Description of the NVR's front panel interface and its components.
Instructions for operating the NVR using the included IR remote control.
Guide on using a USB mouse for NVR operation and navigation.
Overview of the NVR's rear panel connections and ports.
Steps for powering on, shutting down, and activating the NVR device.
Guide to the setup wizard for essential NVR configuration.
Process for detecting, activating, and adding IP cameras to the NVR.
Explanation of the live view function and its capabilities.
Details on various operations and functions available in live view mode.
Customizing live view settings like output interface, dwell time, and volume.
Procedure to set up parameters for PTZ camera control and operation.
Steps to customize PTZ presets, patrols, and patterns for automated camera movement.
Defining image quality, stream types, resolution, and encoding for recording.
Setting up schedules for automatic recording and capture based on time.
Setting up motion detection parameters to trigger recording and actions.
Procedures for searching and playing back recorded video files from the NVR.
How to search for and play back recordings using standard search criteria.
Utilizing smart search features to find specific events like motion or line crossing.
Steps to export and back up recorded video files to external storage devices.
How to manage connected storage devices for backup operations.
Configuring motion detection to trigger alarms and response actions.
Setting up handling actions for external sensor alarms connected to the NVR.
Configuring alarms for video loss detection and associated response actions.
Setting up alarms for video tampering detection and response actions.
Configuration for handling system exceptions like HDD errors and network issues.
Configuring face detection parameters to trigger alarms for detected faces.
Setting up vehicle detection for traffic monitoring and license plate capture.
Configuring virtual line crossing detection for people and vehicles.
Setting up intrusion detection for objects entering a predefined virtual region.
Searching for captured face pictures and related video files.
Searching for suspicious behaviors detected by VCA, such as line crossing.
Searching for captured vehicle plates and related information.
Calculating and reporting people entering or leaving a configured area.
Analyzing customer visit times and dwell times in a configured area using color-coded data.
Performing advanced searches for thermal imaging detection results.
Setting up basic network parameters like IP address, gateway, and DNS.
Advanced network configurations including Hik-Connect, DDNS, and port settings.
Tools for checking network connectivity, delay, and packet loss.
Process for creating and configuring RAID arrays for data redundancy.
Steps for rebuilding RAID arrays to restore functionality after disk failure.
Guide to initializing newly installed hard disk drives for NVR use.
Adding and managing NAS or IP SAN disks as network HDDs.
Organizing HDDs into groups for efficient storage management.
Allocating specific storage quotas for cameras for recorded files or pictures.
Customizing on-screen display settings like date, time, and camera name.
Setting up privacy mask zones to prevent specific areas from being viewed or recorded.
Adjusting image parameters such as brightness, contrast, and saturation.
Viewing and exporting system log files for diagnostics and backup.
Procedures for updating the NVR firmware via local backup or FTP.
Steps to reset NVR settings to factory defaults.
Configuring general device settings like output standard and language.
Adding, deleting, and managing user accounts and their permissions.
Detailed technical specifications for various NVR models.
Specific technical specifications for the DS-9600NI-I8 model.
List of IP cameras compatible with the NVR and their supported features.
List of compatible Hikvision IP cameras.
List of compatible third-party IP cameras.
To Next Page