Need help?Do you have a question about the HIKVISION DS-7608NXI-K2 and is the answer not in the manual?
General| Product color | Black |
|---|---|
| Rack capacity | 1U |
| Rack mounting | Yes |
| Input bandwidth | 80 Mbit/s |
| Output bandwidth | 160 Mbit/s |
| Maximum frame rate | 30 fps |
| Maximum resolution | 3840 x 2160 pixels |
| Alarm input channels | 4 |
| Video input channels | 8 channels |
| Alarm output channels | 1 |
| Supported resolutions | 12 MP/8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF |
| Audio formats supported | G.711 A-law, G.711 μ-law, G.722, AAC, G.726 |
| Video formats supported | H.264, H.264+, H.265, H.265+ |
| Wi-Fi | No |
| HDD capacity | 10000 GB |
| HDD interface | SATA |
| Maximum storage capacity | 20 TB |
| Number of HDDs installed | 0 |
| Number of HDDs supported | 2 |
| Networking standards | IEEE 802.3af, IEEE 802.3at |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN data rates | 10, 1000, 100 Mbit/s |
| Ethernet LAN (RJ-45) ports | 9 |
| Supported network protocols | TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP, HTTP, HTTPS |
| Power over Ethernet (PoE) ports quantity | 8 |
| Output current | 2.5 A |
| Output voltage | 48 V |
| Power consumption (typical) | 15 W |
| Total Power over Ethernet (PoE) budget | 80 W |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Sustainability certificates | Federal Communications Commission (FCC), CE |
Weight and Dimensions| Depth | 315 mm |
|---|---|
| Width | 385 mm |
| Height | 52 mm |
| Weight | 3000 g |
Guides through the initial activation process, including setting an admin password for the video recorder.
Explains how to access the device interface via pattern or password authentication.
Details how to control Pan, Tilt, and Zoom (PTZ) functions of connected cameras.
Guides through playing back recorded videos from selected cameras and dates.
Describes analyzing and playing back videos containing specific events like motion detection.
Covers essential system settings like output resolution, system time, and user management.
Details adding, configuring, and managing user accounts with different permission levels.
Explains setting up network parameters, including IP address, DNS, and connectivity.
Covers adding, configuring, and upgrading network cameras connected to the recorder.
To Next Page