HIKVISION DS-7608NXI-K2

4.
Go to Conguraon → Event → Normal Event → Alarm Output .
5.
Select an alarm output item from the list. Refer to Alarm Output for details.
Congure PTZ Linkage
Video recorder can trigger the PTZ acons (e.g., call preset/patrol/paern) when the alarm event,
or VCA detecon events occur.
Steps
1.
Go to Linkage
Acon interface of the alarm input or VCA detecon.
2.
Select PTZ Linkage.
3.
Select the camera to perform the PTZ acons.
4.
Select the preset/patrol/paern No. to call when the alarm events occur.
Figure 6-23 PTZ Linkage
Note
You can set one PTZ type only for the linkage acon each me.
6.7 Intelligent Search
6.7.1 AcuSearch
Enable AcuSearch funcon for selected channels.
Steps
1.
Go to Conguraon → Intelligent Search → Acu Search .
2.
Turn on Enable.
3.
Select the channels on which you want to enable the AcuSearch
funcon.
4.
Click Apply.
Note
You can perform AcuSearch in playback interface. For details, please refer to Normal Playback
and Slice Playback .
Network Video Recorder User Manual
78