HIKVISION DS-7608NXI-K2

4.
Set the arming schedule. Refer to Congure Arming Schedule for details.
5.
Set the linkage acons. Refer to Congure Alarm Linkage Acon for details.
6.
Click Apply。
6.6.5 Other Events
Thermal Camera Detecon
The device supports the event detecon modes of thermal network cameras: re detecon,
temperature detecon, etc. You can congure the arming schedule and linkage acons of the
selected event.
Before You Start
Add a thermal network camera to your device and make sure the camera is
acvated.
Steps
1.
Go to Conguraon → Event → Other Events .
2.
Select a thermal camera
detecon event.
3.
Set Camera.
4.
Set the arming schedule. Refer to
Congure Arming Schedule for details.
5.
Set the linkage acons. Refer to Congure Alarm Linkage Acon for details.
6.
Click Apply.
6.6.6
Congure Arming Schedule
Steps
1.
Click Arming Schedule.
2.
Choose one day of a week and set the
me segment. Up to eight me periods can be set within
each day.
Note
Time periods shall not be repeated or overlapped.
Network Video Recorder User Manual
75