Need help?Do you have a question about the HIKVISION DS-7608NI-M2 Series and is the answer not in the manual?
General| Model | DS-7608NI-M2 |
|---|---|
| Video Input | 8 channels |
| Decoding Format | H.265+/H.265/H.264+/H.264 |
| Max Incoming Bandwidth | 80 Mbps |
| Two-Way Audio | Yes |
| HDD Bays | 2 |
| SATA | 2 SATA interfaces |
| Power Consumption | ≤ 15W (without HDD) |
| Operating Humidity | 10% to 90% |
| Type | NVR (Network Video Recorder) |
| Video Output | 1 channel |
| HDMI Output | 1 |
| VGA Output | 1 |
| Resolution | 3840 × 2160 |
| Audio Output | 1 channel |
| Network Interface | 1 RJ-45 port (10/100/1000 Mbps) |
| USB Interface | 2 USB 2.0 |
| Alarm In/Out | 4/1 |
| Power Supply | AC 100~240V, 50/60Hz |
| Operating Temperature | -10°C to +55°C |
Details critical safety guidelines for device installation, usage, and maintenance to prevent hazards.
Guides on activating the device, setting initial passwords and user accounts.
Details network configuration for IPv4 and IPv6, including DHCP and MTU settings.
Instructions for installing, initializing, and managing Hard Disk Drives for storage.
Steps to add IP cameras for live view and recording, including manual and automatic methods.
How to access and view live video feeds from connected cameras, including basic controls.
Operating Pan, Tilt, and Zoom functions for PTZ-enabled cameras, including presets and patrols.
Setting video parameters like resolution, frame rate, bitrate, and H.265+ encoding.
Setting automatic start/stop times for recording based on schedules and event triggers.
Managing recorded video playback, including editing clips and using thumbnail views.
Managing video content analysis events from IP cameras, including various detection types.
Enabling and configuring smart detection for objects, vehicles, faces, and human bodies.
Advanced search capabilities for face, human, and vehicle detection results.
Creating, editing, and managing user accounts with different permission levels.
Procedures for resetting forgotten passwords using GUID, security questions, or reserved email.
Updating device firmware via local backup, FTP, or Hik-Connect.
Implementing security measures like IP/MAC filtering, RTSP authentication, and ONVIF configuration.
To Next Page