HIKVISION DS-7608NI-M2 Series - Configure TCP;IP

1.1.5 Acvate via Web Browser
You can get access to the recorder via web browser. You may use one of the following web
browsers: Internet Explorer 6.0 and above, Apple Safari, Mozilla Firefox, and Google Chrome. The
supported
resoluons include 1024 × 768 and above.
Steps
1. Enter the IP address in web browser, and then press Enter. The default IP address is
192.168.1.64.
Figure 1-7 Web Browser Acvaon
2. Set the password for the admin user account.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case leers, lower
case leers, numbers, and special characters) in order to increase the security of your product.
And we recommend you reset your password regularly, especially in the high security system,
reseng the password monthly or weekly can beer protect your product.
3.
Click OK.
1.2
Congure TCP/IP
TCP/IP must be properly congured before operang your device over a network. Both IPv4 and
IPv6 are available.
Steps
1. Go to System → Network → TCP/IP .
Network Video Recorder User Manual
6