HIKVISION DS-7608NI-M2 Series - PTZ Control

Figure 3-5 Channel-Zero Encoding
3. Congure Frame Rate, Max. Bitrate Mode, and Max. Bitrate.
Note
The higher frame rate and bitrate require the higher bandwidth.
4. Click Apply.
You can view all the channels on one screen via CMS or web browser.
3.6 PTZ Control
3.6.1 Congure PTZ Parameters
Follow these procedures to set the PTZ parameters. The PTZ parameters conguraon must be
done before you can control the PTZ camera.
Steps
1. Click on the quick sengs toolbar of the PTZ camera.
2. Click PTZ Parameters
Sengs to set the PTZ parameters.
Network Video Recorder User Manual
29