HIKVISION DS-7608NI-M2 Series - Configure POS Alarm

●
Font size and font color
●
Display me (sec) of the characters. The value ranges 5 -3600 sec.
●
Timeout of POS event. The value ranges 5 -3600 sec. When the device has not received the
POS message within the
dened me, the transacon ends.
5. In Privacy
Sengs, set the POS privacy informaon to not display on the image, e.g., the card
number, user name, etc.
The
dened privacy informaon will be displayed using ***on the image instead.
6. Check Overlay POS in Live View. When this feature is enabled, the POS informaon is overlaid
on the Live View image.
Note
Drag the frame to adjust the textbox size and posion on POS sengs interface preview screen.
7. Click Apply to acvate the sengs.
14.3
Congure POS Alarm
A POS event can trigger channels to start recording, or trigger full screen monitoring, etc.
Steps
1. Go to Storage → Recording Schedule .
2. Set the arming schedule. Refer to
Congure Arming Schedule .
3. Go to System → POS .
4. Click Event Linkage on the POS adding or
eding interface.
Network Video Recorder User Manual
123