HIKVISION DS-7608NI-M2 Series - Configure Linkage Actions

4. Click Save.
What to do next
Go to Conguraon → Event → Smart Event → More Events to congure events.
6.2.3 Hard Hat Detecon
Hard hat detecon detects people who are not wearing hard hats. You can congure the arming
schedule and linkage
acons. Hard hat detecon is congurable via web browser.
6.2.4 Face Capture
The face capture detects and captures faces appearing in the scene. Linkage acons can be
triggered when a human face is detected.
Steps
1. Go to Smart Analysis → Smart Event
Sengs → Facial Recognion .
2. Click Face Capture.
Figure 6-4 Face Capture
3. Select a camera to congure.
4. Check Enable Face Capture.
5. Oponal: Check Save VCA Picture to save the captured pictures of face detecon.
6. Set the detecon sensivity.
Note
Sensivity range: [1-5]. The higher the value is, the easier faces will be detected.
7. Set the arming schedule. Refer to Congure Arming Schedule .
Network Video Recorder User Manual
54