HIKVISION DS-7608NI-M2 Series - People Gathering Detection

Note
Up to 4 areas are selectable.
2) Set Time Threshold.
Time Threshold
The
me of the target staying in the region. If the value is 10, an alarm is triggered aer
the target has stayed in the region for 10 s. Range: [1-10].
3) Set Sensivity.
Sensivity
Similarity of the background image to the object. The higher the value is, more easily the
detecon alarm will be triggered.
7. Set the arming schedule. Refer to
Congure Arming Schedule .
8. Set the linkage acons. Refer to Congure Linkage Acons .
9. Click Apply.
6.2.13 People Gathering
Detecon
People gathering detecon is used to detect whether the density of human bodies within a
specied area exceeds the set value and trigger alarm for linked acons.
Steps
1. Go to Smart Analysis → Smart Event
Sengs → Other Events .
2. Select a camera.
3. Click People Gathering.
Figure 6-10 People Gathering Detecon
4. Check Enable People Gathering Detecon.
5. Oponal: Check Save VCA Picture to save the captured people gathering detecon pictures.
Network Video Recorder User Manual
63