HIKVISION DS-7608NI-M2 Series - Test Network Delay and Packet Loss

Steps
1. Go to Maintenance → Network → Trac .
2. You can view the real-me network trac status, including MTU (Maximum Transmission Unit),
and network throughput.
Figure 16-2 Network Trac
16.5.2 Test Network Delay and Packet Loss
Network delay is caused by slow response of the device when oversized data informaon is not
limited during transmission under certain network protocol, e.g. TCP/IP. Packet loss test is for
tesng network packet loss rate that is the rao of lost data packet and total number of
transmied data packet.
Steps
1. Go to Maintenance → Network → Network Detecon .
2. Select a network card in Select NIC.
3. Enter the
desnaon IP address in Desnaon Address.
4. Click Test.
Figure 16-3 Test Network Delay and Packet Loss
Network Video Recorder User Manual
140