HIKVISION DS-7608NI-M2 Series - Configure SNMP

13.3 Congure SNMP
You can congure SNMP (SNMP v2 and SNMP v3) sengs to get device status and parameter
informaon via web browser. SNMP v3 adds cryptographic security to SNMP v2, and provides
security with authencaon and privacy.
Before You Start
Download the SNMP
soware to receive device informaon via the SNMP port. By seng the trap
address and port, the device is allowed to send alarm events and excepon messages to the
center.
Steps
1. Go to
Conguraon → Network → Advanced Sengs → SNMP via web browser.
Network Video Recorder User Manual
112