Need help?Do you have a question about the HIKVISION DS-7608NI-K1 and is the answer not in the manual?
General| Audio system | 2-way |
|---|---|
| Video codecs | H.265/H.265+/H.264/H.264+/MPEG4 |
| Input bandwidth | 80 Mbit/s |
| Maximum resolution | 1920 x 1080 pixels |
| Alarm input channels | 4 |
| Video input channels | 8 channels |
| Alarm output channels | 1 |
| Supported resolutions | 1920 × 1080, 1600 × 1200, 1280 × 1024, 1280 × 720, 1024 × 768 |
| Output current | 1.8 A |
| Output voltage | 48 V |
| Power consumption (typical) | 10 W |
| Total Power over Ethernet (PoE) budget | 75 W |
| HDMI output | Yes |
| Networking standards | IEEE 802.3af, IEEE 802.3at |
| USB 2.0 ports quantity | 2 |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet LAN (RJ-45) ports | 9 |
| Supported network protocols | TCP/IP, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP, HTTPS |
| Power over Ethernet (PoE) ports quantity | 8 |
| HDD capacity | 0 GB |
| HDD interface | SATA, SATA II, SATA III |
| Maximum storage capacity | 6 TB |
| Number of HDDs installed | 0 |
| Wi-Fi | No |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Certification | EN 301489-1, EN 301489-19, EN 301489-52, EN 303413, EN 301511, EN 301908-1, EN 301908-2, EN 301908-13, EN 62311:2008 |
| Product color | Black |
| Rack capacity | 1U |
Weight and Dimensions| Depth | 240 mm |
|---|---|
| Width | 315 mm |
| Height | 48 mm |
| Weight | 1180 g |
Guides through powering on, shutting down, and activating the NVR with a password.
Details the procedure for starting up and performing a standard or panel shutdown.
Covers setting an admin password and exporting a GUID file for device activation.
Details the user login process and how to log out of the NVR system.
Guides on how to reset the admin password using an exported GUID file.
Explains how to use the setup wizard for initial NVR configuration.
Covers initializing and managing Hard Disk Drives for the NVR.
Provides an interface for managing connected IP cameras.
Describes methods for adding IP cameras to the NVR system.
Covers editing camera parameters and configuring custom protocols.
Explains how to edit IP camera settings connected via PoE interfaces.
Guides on configuring PoE interface settings for long-distance transmission.
Details various operations available in live view, like single screen, multi-screen, and playback.
Guides on customizing live view settings like output interface and dwell time.
Guides on setting PTZ parameters before controlling PTZ cameras.
Covers setting PTZ presets, patrols, and patterns for camera control.
Guides on setting patrols to move PTZ to key points with specified durations.
Describes how to set patterns by recording PTZ movement.
Explains how to enter and use the PTZ control panel.
Guides on configuring image quality parameters like stream type and resolution.
Details settings for recording, including stream type, resolution, and video encoding.
Guides on setting up recording and capture schedules for cameras.
Explains how to set up motion detection parameters and trigger actions.
Guides on configuring alarm-triggered recording and capture settings.
Details configuration of VCA event triggered recording.
Explains how to perform manual recording and continuous capture.
Covers enabling redundant recording and capture for enhanced data safety.
Explains how to group HDDs for saving record files and captured pictures.
Details methods to protect record files by locking or setting HDD to read-only.
Guides on how to lock recording files during playback or export.
Explains how to set the HDD property to Read-only.
Covers methods for playing back recorded video files.
Guides on playing back recorded video files of a specific channel instantly.
Details how to play back videos by channel or time.
Guides on playing back video files within a specified time duration.
Describes using smart playback to analyze video for motion or line crossing.
Guides on playing back files searched by event type like alarm input or motion.
Details how to record and search related information using video tags.
Explains how to play video files in multiple sub-periods simultaneously.
Guides on playing back record files associated with system logs.
Details how to look up and play back files from external devices.
Explains how to search and view captured pictures stored in HDDs.
Covers auxiliary playback functions like frame-by-frame and thumbnails.
Guides on playing video files frame by frame for detailed image checking.
Explains how to use thumbnails view to locate required video files on the time bar.
Details how to use the mouse to drag on the time bar for fast view of video files.
Explains how to use the digital zoom feature to zoom in on images.
Covers managing video clips, captured pictures, locked files, and tags in playback.
Guides on backing up record files to various devices quickly.
Explains how to export record files to backup devices quickly.
Details backing up record files by searching video or picture files.
Guides on backing up event-related record files using event search.
Explains how to export video clips or captured pictures during playback.
Covers management of USB flash drives, USB HDDs, and eSATA HDDs.
Details the N+1 hot spare system for enhanced reliability.
Guides on setting the work mode to Hot Spare Mode.
Explains how to set the work mode to Normal Mode and enable hot spare function.
Covers adding working devices to the hot spare system.
Guides on setting up motion detection parameters and response actions.
Details how to set handling actions for external sensor alarms.
Explains how to detect video loss and take alarm response actions.
Guides on triggering alarms when the lens is covered and setting response actions.
Covers settings for handling various exceptions like HDD errors and network issues.
Details setting alarm response actions like event hint, full screen, and email notifications.
Explains how to trigger an alarm output manually or based on schedules.
Guides on manually triggering or clearing alarm outputs.
Guides on configuring POS settings, protocols, and connection modes.
Details settings for the Universal Protocol, including tags and case sensitivity.
Covers configuration for the AVE protocol, including rule and address settings.
Explains configuration for the NUCLEUS protocol, including employee and terminal numbers.
Guides on assigning POS machines to channels for overlaying POS information.
Explains how to set POS privacy information to not display on the image.
Guides on restoring factory default settings for the NVR.
Offers solutions for common issues like no display and audible warnings.
To Next Page
