Need help?Do you have a question about the HIKVISION DS-7608NI-Q2/8P and is the answer not in the manual?
General| DHCP client | Yes |
|---|---|
| Input bandwidth | 80 Mbit/s |
| Maximum frame rate | 60 fps |
| Maximum resolution | 3840 x 2160 pixels |
| Alarm input channels | 1 |
| Video input channels | 8 channels |
| Supported resolutions | 1024 x 768, 1280 × 720, 1280 × 1024, 1920 × 1080, 1600 × 1200, 3840 × 2160 |
| Video recording modes | 720p, 1080p |
| Wi-Fi | No |
| HDD capacity | 2000 GB |
| HDD interface | Serial ATA |
| Maximum storage capacity | 16 TB |
| Number of HDDs supported | 2 |
| Networking standards | IEEE 802.3af, IEEE 802.3at |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Ethernet LAN (RJ-45) ports | 9 |
| Supported network protocols | TCP/IP, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP, HTTPS |
| Power over Ethernet (PoE) ports quantity | 8 |
| Product color | Black |
| Rack capacity | 1U |
| LED indicators | LAN, Power, Status |
| AC input voltage | 100 - 240 V |
| Power consumption (typical) | 15 W |
| Total Power over Ethernet (PoE) budget | 80 W |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Depth | 315 mm |
|---|---|
| Width | 385 mm |
| Height | 52 mm |
| Weight | 3000 g |
Advice on environmental conditions and handling to ensure proper NVR operation.
Overview of general features including compatibility and video formats.
Features for viewing live video locally, including HDMI/VGA output.
Configuration for alarm events and system exceptions.
Features related to network connectivity, remote access, and protocols.
Steps for powering on, shutting down, and activating the NVR for first use.
Step-by-step guide for initial NVR setup using the configuration wizard.
Procedure to add and configure IP cameras for live view and recording.
Key functions and controls available during live view.
Setting up parameters for controlling PTZ cameras.
Setting recording parameters like stream type, resolution, and bitrate.
Defining schedules for automated recording based on time or events.
Setting up recording triggered by motion detection events.
Configuring recording to start when an alarm input is triggered.
Accessing and reviewing recorded video files.
Searching and playing back files using standard criteria like date and time.
Searching video based on motion or intrusion events, playing back detected segments faster.
Procedures for exporting recorded data to backup storage.
Exporting files identified through a normal video search.
Configuring motion detection and setting alarm response actions.
Defining what actions the NVR takes when an alarm or exception occurs.
Configuring and detecting faces within video streams.
Setting up virtual lines to detect objects crossing them.
Defining virtual regions to detect unauthorized entry or loitering.
Searching for captured face images and retrieving associated video footage.
Searching video based on detected behavioral events like intrusion or line crossing.
Setting fundamental network parameters such as IP address, gateway, and DNS.
Accessing and configuring advanced network features.
Enabling and configuring remote access via the Hik-Connect platform.
Process to prepare a new hard disk drive for use with the NVR.
Updating the NVR's firmware for new features or fixes.
Resetting the NVR's parameters to their factory default values.
Managing user access levels, permissions, and accounts.
Guidance on resolving common issues and problems with the NVR.
To Next Page
