HIKVISION DS-7608NXI-K2

Figure 6-21 Face Picture Comparison
2.
Select a camera.
3.
Turn on Enable.
4.
Select the face picture library (or libraries) in List Library Linkage.
5.
Set the face picture library similarity.
Similarity
Similarity value ranges from 0 to 100. Device will analyze the similarity between the detected
face picture and face pictures in the library. When the similarity reaches the threshold value,
the face picture comparison succeeded, and the face picture is recognized.
6.
Set the arming schedule. Refer to
Congure Arming Schedule for details.
7.
Set the linkage
acons for Linkage Succeeded and Linkage Failed. Refer to Congure Alarm
Linkage Acon for details.
Linkage Succeeded
The device will perform linkage
acons when the face picture comparison succeeded.
Linkage Failed
The device will perform linkage acons when the face picture comparison failed.
8.
Click Apply.
6.6.4 Non-Video Event
Congure
non-video event.
Steps
1.
Go to Conguraon → Device Management → Non-Video Event.
2.
Select the device.
3.
Select the Alarm Content.
Network Video Recorder User Manual
74