HIKVISION DS-7608NXI-K2

Auto Switch Interval
The me to dwell in a camera before switching to next camera when auto-switch in live view
is enabled.
Alarm Pop-up Output
Select the output to show alarm video.
Alarm Pop-up Delay
Set the me to show alarm event image.
Audio
Turn
on/o audio output for the selected video output.
Volume
Adjust the live view, playback, and two-way audio volume for the selected video output
interface.
3.
Click Apply.
Congure
Live View Layout
Steps
1.
Go to Conguraon → System → Live View → View .
2.
Set Output Interface.
3.
Select a window, and double click a camera the list you would like to display.
means no
camera is displayed on the window.
4.
Oponal: Click or to start or stop live view of all cameras.
5.
Click Apply.
Congure
Channel-Zero Encoding
Enable the channel-zero encoding when you need to get a remote view of many channels in real
me from a web browser or CMS (Client Management System) soware, in order to decrease the
bandwidth requirement without aecng the image quality.
Steps
1.
Go to Conguraon → System → Live View → General .
2.
Set Video Output Interface as Channel-Zero.
3.
Go to
Conguraon → System → Live View → Channel-Zero .
Network Video Recorder User Manual
41