EasyManua.ls Logo

HIKVISION DS-7604NI-SE/P User Manual

HIKVISION DS-7604NI-SE/P
214 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Network Video Recorder
User Manual
UD.6L0202D1956A01

Table of Contents

Other manuals for HIKVISION DS-7604NI-SE/P

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7604NI-SE/P and is the answer not in the manual?

HIKVISION DS-7604NI-SE/P Specifications

General IconGeneral
Product colorBlack
Channels quantity4 channels
Playback resolutions supported5MP, 3MP, 1080p, UXGA, 720p, VGA, 4CIF, DCIF, 2CIF, CIF, QCIF
Audio input1
USB 2.0 ports quantity2
Ethernet LAN (RJ-45) ports5
Ethernet interface typeFast Ethernet, Gigabit Ethernet
HDD capacity1000 GB
HDD interfaceSerial ATA
Maximum HDD capacity4000 GB
Power consumption (typical)15 W
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Weight2000 g
Dimensions (WxDxH)445 x 290 x 45 mm

Summary

Safety Instruction

Warnings and Cautions

Precautions to prevent serious injury, death, or equipment damage.

Preventive and Cautionary Tips

Advice for proper installation and operation to avoid issues.

Chapter 2 Getting Started

Starting Up and Shutting Down the NVR

Procedures for powering the device on and off.

Setting Admin Password

Process for setting the initial administrator password for security.

Using the Wizard for Basic Configuration

Step-by-step guide for initial NVR setup.

Login and Logout

Instructions for accessing and exiting the NVR system.

Adding and Connecting the IP Cameras

Steps to add and configure network cameras to the NVR.

Chapter 3 Live View

Operations in Live View Mode

How to interact with the live view interface.

Chapter 4 PTZ Controls

Configuring PTZ Settings

Steps to set up PTZ camera parameters.

Setting PTZ Presets, Patrols & Patterns

How to configure camera movements and positions.

Chapter 5 Recording Settings

Configuring Parameters

Setting image quality, resolution, and stream types.

Configuring Recording Schedule

Defining when the NVR should record video.

Configuring Motion Detection Recording

Setting up recording triggered by motion.

Configuring Alarm Triggered Recording

Configuring recording based on alarm inputs.

Configuring VCA Triggered Recording

Setting up recording based on Video Content Analysis events.

Chapter 8 Alarm Settings

Setting Motion Detection Alarm

Configuring alarms based on motion detection events.

Detecting Video Loss Alarm

Configuring alarms when video signal is lost.

Detecting Video Tampering Alarm

Setting alarms for video tampering events.

Detecting VCA Alarm

Configuring alarms based on Video Content Analysis events.

Chapter 9 Network Settings

Configuring General Settings

Basic network settings like IP address and DNS.

Chapter 10 HDD Management

Initializing HDDs

Process for preparing new HDDs for use.

Configuring HDD Error Alarms

Setting up alarms for HDD malfunctions.

Chapter 12 NVR Management and Maintenance

Upgrading System

Updating the NVR's firmware.

Appendix

Troubleshooting

Solutions for common operational problems and errors.

Related product manuals