HIKVISION DS-7604NI-SE/P - Editing the Connected IP Cameras and Configuring Customized Protocols

User Manual of Network Video Recorder
42
2.5.3 Editing the Connected IP Cameras and Configuring
Customized Protocols
After the adding of the IP cameras, the basic information of the camera lists in the page, you can configure the
basic setting of the IP cameras.
Steps:
1. Click the icon to edit the parameters; you can edit the IP address, protocol and other parameters.
Figure 2. 25 Edit the Parameters
2. Click OK to save the settings and exit the editing interface.
To edit advanced parameters:
Steps:
1. Drag the horizontal scroll bar to the right side and click the icon.
Figure 2. 26 Network Configuration of the Camera
2. You can edit the network information and the password of the camera.