Need help?Do you have a question about the HIKVISION DS-7604NI-Q1/4P and is the answer not in the manual?
General| Model | DS-7604NI-Q1/4P |
|---|---|
| Type | NVR |
| Video Input Channels | 4 |
| IP Video Input | 4 |
| HDMI Output | 1 |
| VGA Output | 1 |
| Max Incoming Bandwidth | 40 Mbps |
| Max Outgoing Bandwidth | 40 Mbps |
| Video Compression | H.265+/H.265/H.264+/H.264 |
| Synchronous Playback | 4-ch |
| Audio Output Channels | 1 |
| USB Interface | 2 × USB 2.0 |
| Supported Standard | IEEE 802.3af/at |
| Power | 48V DC |
| Power Consumption (without HDD) | ≤ 10 W |
| Operating Humidity | 10% to 90% |
| Max HDD Capacity | 6TB |
| Video Output | HDMI, VGA |
| Decoding Format | H.265, H.264 |
| SATA | 1 SATA interface |
| Capacity (per disk) | 6TB |
| Network Interface | 1, RJ-45 10/100 Mbps self-adaptive Ethernet interface |
| PoE Interface | 4, RJ-45 10/100 Mbps self-adaptive Ethernet interface |
| Operating Temperature | -10 °C to 55 °C (14 °F to 131 °F) |
Guides through the initial power-up, shutdown, and device activation process.
Explains how to use the setup wizard for essential NVR configuration.
Details the process of adding and connecting IP cameras to the NVR.
Explains various operations and functions available in the live view mode.
Guides on defining recording parameters like stream type and resolution.
Details how to set recording schedules for cameras based on time.
Explains how to set up motion detection and schedule recording based on it.
Guides on configuring recording triggered by alarm inputs.
Explains how to set up recording triggered by Video Content Analysis events.
Details various methods for playing back recorded video files.
Guides on exporting record files to backup devices using different search methods.
Details how to configure motion detection alarms and their response actions.
Explains various alarm response actions such as notifications and outputs.
Guides on configuring face detection rules and sensitivity.
Explains how to configure line crossing detection rules and draw lines.
Details how to configure intrusion detection rules and define regions.
Guides on configuring region entrance detection rules and sensitivity.
Guides on searching for captured face images and related video files.
Explains how to search for behavior analysis events like intrusion or line crossing.
Guides on setting general network parameters like IP address and DNS.
Guides on initializing newly installed hard disk drives for use.
Details methods for upgrading the NVR system firmware via local or FTP.
Offers solutions for common issues encountered with the NVR.
To Next Page
