HIKVISION DS-7608NXI-K2

Upgrade
Upgrade the added network cameras.
Export/Import
The informaon of added network camera can be generated into an excel le and exported to
the local device for backup, including the IP address, port, password of admin, etc. And the
exported le can be edited on your computer, like adding or deleng the content, and
copying the
sengs to other devices by imporng the excel le to it.
Protocol
To connect the network cameras which are not congured with the standard protocols, you
can
congure the customized protocols for them. The system provides 16 customized
protocols.
Camera Acvaon Password Sengs
Change the default password for acvang and adding network cameras. For network
cameras that are already connected, you can choose to change their passwords to this one in
the following pup-up window.
Batch
Conguraon
The device can enable SVC funcon or automacally synchronize me of the selected
network cameras.
Plug-and-Play
The device can add network camera automacally.
Quick Image Output Conguraon
Aer the network camera that supports this funcon is linked to the NVR,enabling this
funcon will increase the image outpung speed of the camera.
Note
This funcon is only available for NVRs that support PoE funcon.
6.3.2 Display Sengs
Congure the OSD (On-Screen Display), image sengs, exposure sengs, day/night switch
sengs, etc.
Steps
1.
Go to Conguraon → Camera → Display .
2.
Set Camera.
3.
Congure parameters as your desire.
OSD Sengs
Congure the OSD (On-screen Display) sengs for the camera, including date/me, camera
name, etc.
Network Video Recorder User Manual
57