HIKVISION DS-7608NXI-K2

Figure 6-14 Video Tampering
2.
Set Camera.
3.
Turn on Enable.
4.
Adjust
Sensivity as your desire. The higher the value is, the more easily the video tampering
can be triggered.
5.
Set the arming schedule. Refer to
Congure Arming Schedule for details.
6.
Set the linkage acons. Refer to Congure Alarm Linkage Acon for details.
7.
Click Apply.
Video Loss
Detect video loss of a camera and take alarm response acons.
Steps
1.
Go to Conguraon → Event → Normal Event → Video Loss .
2.
Set Camera.
3.
Turn on Enable.
4.
Set the arming schedule. Refer to
Congure Arming Schedule for details.
5.
Set the linkage acons. Refer to Congure Alarm Linkage Acon for details.
6.
Click Apply.
Alarm Input
Set linkage acons for an external sensor alarm.
Network Video Recorder User Manual
64