EasyManuals Logo

HIKVISION DS-7608NXI-K2 User Manual

HIKVISION DS-7608NXI-K2
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #95 background imageLoading...
Page #95 background image
Figure 6-24 Recording Schedule
Connuous
Connuous recording.
Event
Recording triggered by all event triggered alarms.
2.
Select a camera in Camera No.
3.
Turn on Enable.
4.
Congure the recording schedule.
1) Click Edit.
2) Select a day to
congure in Weekday.
3) To set an all-day recording schedule, check All Day and select schedule Type.
4) To set other schedules, uncheck All Day and set Start/End
me and schedule Type.
Note
Up to 8 periods can be congured for each day. And the me periods cannot be overlapped
with each other.
5) Click OK to save the sengs and go back to upper level menu.
Note
You can also select schedule type as Connuous or Event, and drag the cursor on the desired
period to draw a colored bar.
5.
Click Advanced to set advanced parameters.
Record Audio
Audio will be record to the video le.
Pre-Record
Network Video Recorder User Manual
80

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-7608NXI-K2 and is the answer not in the manual?

HIKVISION DS-7608NXI-K2 Specifications

General IconGeneral
Product colorBlack
Rack capacity1U
Rack mountingYes
Input bandwidth80 Mbit/s
Output bandwidth160 Mbit/s
Maximum frame rate30 fps
Maximum resolution3840 x 2160 pixels
Alarm input channels4
Video input channels8 channels
Alarm output channels1
Supported resolutions12 MP/8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF
Audio formats supportedG.711 A-law, G.711 μ-law, G.722, AAC, G.726
Video formats supportedH.264, H.264+, H.265, H.265+
Wi-FiNo
HDD capacity10000 GB
HDD interfaceSATA
Maximum storage capacity20 TB
Number of HDDs installed0
Number of HDDs supported2
Networking standardsIEEE 802.3af, IEEE 802.3at
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN data rates10, 1000, 100 Mbit/s
Ethernet LAN (RJ-45) ports9
Supported network protocolsTCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP, HTTP, HTTPS
Power over Ethernet (PoE) ports quantity8
Output current2.5 A
Output voltage48 V
Power consumption (typical)15 W
Total Power over Ethernet (PoE) budget80 W
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Sustainability certificatesFederal Communications Commission (FCC), CE
Weight and Dimensions IconWeight and Dimensions
Depth315 mm
Width385 mm
Height52 mm
Weight3000 g

Related product manuals