Network Video Recorder User Manual
31
information.
Before You Start
Install at least an HDD to your video recorder. For detailed steps, refer to Quick Start Guide.
Steps
1. Go to Configuration → Record → Storage.
2. Select an HDD.
3. Click Init.
Repair Database
Repair an HDD that with error in database. Please operate it with the help of professional
technical support.
Add Network Disk
You can add the allocated NAS or IP SAN disk to the video recorder, and use it as a network HDD.
Steps
1. Go to Configuration → Record → Storage.
2. Click Add.
3. Select NetHDD.
4. Set Type as NAS or IP SAN.
5. Enter NetHDD IP address.
6. Click to search the available disks.
Figure 5-13 Add NetHDD
7. Select NAS disk from the list, or manually enter the directory in NetHDD Directory.
To Next Page
Loading...
Need help?
General
