User Manual of All-in-One Network Video Recorder
41
3.2 Operations in Live View Mode
In live view mode, there are many functions provided. The functions are listed below.
• Single Screen: showing only one screen on the monitor.
• Multi-screen: showing multiple screens on the monitor simultaneously.
• Auto-switch: the screen is auto switched to the next one. And you must set the dwell time for each screen on
the configuration menu before enabling the auto-switch.
Menu > Configuration > Live View > Dwell Time
• Start Recording: continuous record and motion detection record are supported.
• Add IP Camera: the shortcut to the IP camera management interface.
• One-touch Advertising: video, audio and picture advertising are supported.
• Playback: playback the recorded videos for current day.
• PTZ Control: the shortcut to PTZ control panel.
• Output Mode: select the output mode to Standard, Bright, Gentle or Vivid.
3.2.1 Using the Mouse in Live View
Table 3. 2 Mouse Operation in Live View
Four modes of output supported, including Standard, Bright, Gentle and Vivid.