User Manual of All-in-One Network Video Recorder
23
2.3 Using the Wizard for Basic Configuration
Purpose:
After admin password is set, the setup wizard pops up automatically. It can walk you through some basic settings
of the NVR.
Figure 2. 5 Start Wizard Interface
Operating the Setup Wizard:
1. The Setup Wizard can walk you through some important settings of the NVR. If you do not want to use the
Setup Wizard at that moment, click the Exit button. You can also choose to use the Setup Wizard next time
by leaving the “Start wizard when the device starts?” checkbox checked.
2. Click the Next button to enter the date and time settings window, as shown in Figure 2. 6.
Figure 2. 6 Date and Time Settings
3. After the time settings, click Next button which takes you to the network setup wizard window.
To Next Page
Loading...
Need help?
General
