User Manual of All-in-One Network Video Recorder
32
2.6 Adding and Connecting the IP Cameras
2.6.1 Activating the IP Camera
Purpose:
Before adding the camera, make sure the IP camera to be added is in active status.
Before you start:
Ensure the network connection is valid and correct. For detailed checking and configuring of the network, please
see Chapter 12.3 Checking Network Traffic and Chapter 12.4 Configuring Network Detection.
Steps:
1. Enter the IP Camera management interface.
Option 1: Right-click in the live view mode and click Add IP Camera.
Option 2: Menu > Camera > Camera
For the IP camera detected online in the same network segment, the Security status shows whether it is
active or inactive.
Figure 2. 20 IP Camera Management Interface
2. Click the inactive icon of the camera to enter the following interface to activate it. You can also select
multiple cameras from the list and click the One-touch Activate to activate the cameras in batch.
Figure 2. 21 Activate the Camera
To Next Page
Loading...
Need help?
General
