HIKVISION DS-7600NXI-I/S - Configure Poe Interface

Network Video Recorder User Manual
40
Step 2 Position the cursor on a window with no linked IP camera and click the button.
Figure 3-2 Edit IP Camera
Step 3 Select Adding Method as Manual.
• Plug-and-Play: The camera is physically connected to the PoE interface. Its parameters
cannot be edited. You can go to System > Network > TCP/IP to change IP address of PoE
port. .
• Manual: Add IP camera without physical connection via network.
Step 4 Enter the IP address, the user name and password of administrator manually.
Step 5 Click OK.
3.2.3 Configure PoE Interface
Purpose:
When it requires long-distance PoE transmission (100 to 300 m), you can enable long distance
mode for the PoE channel.
Step 1 Go to Camera > Camera >PoE Settings.
Step 2 Enable or disable long network cable mode by selecting Long Distance or Short Distance
radio.
 Long Distance: Long-distance (100 to 300 meters) network transmissions via PoE interface.
 Short Distance: Short-distance (< 100 meters) network transmission via PoE interface.