Need help?Do you have a question about the HIKVISION DS-7616NI-Q1 and is the answer not in the manual?
General| Two-way talk | Yes |
|---|---|
| Input bandwidth | 160 Mbit/s |
| Output bandwidth | 80 Mbit/s |
| Maximum resolution | 4096 x 2160 pixels |
| Video input channels | 16 channels |
| Supported resolutions | 4096 x 2160, 3840 x 2160, 2560 x 1440, 1920 x 1080, 1600 x 1200, 1280 x 1024, 1280 x 720 |
| Video recording modes | 720p, 1080p |
| Audio formats supported | G.711 A-law, G.711 μ-law, G.726 |
| Video formats supported | H.264, H.264+, H.265, H.265+, MPEG4 |
| Resolution at capture speed | 1280x720@60fps, 1920x1080@60fps, 3840x2160@30fps |
| Certification | FCC Part 15 Subpart B, ANSI C63.4-2014 CE EN 55032: 2015, EN 61000-3-2, EN 61000-3-3, EN 50130-4, EN 55035: |
| Product color | Black |
| Rack capacity | 1U |
| Audio RCA outputs | 1 |
| USB 2.0 ports quantity | 2 |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Supported network protocols | TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP, HTTP, HTTPS |
| HDD capacity | - GB |
| HDD interface | SATA |
| Maximum storage capacity | 8 TB |
| Number of HDDs installed | 0 |
| Wi-Fi | No |
| Output voltage | 12 V |
| Power consumption (typical) | 10 W |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Depth | 240 mm |
|---|---|
| Width | 320 mm |
| Height | 48 mm |
| Weight | 1000 g |
General features of the NVR including connectivity and video formats.
Features related to local video output and monitoring capabilities.
Capabilities for managing Hard Disk Drives for storage.
Features for configuring recording schedules and playback options.
Options for backing up recorded data.
Functions for handling various alarms and system exceptions.
Network-related functionalities and protocols supported by the NVR.
Overview of the live view function and its icons.
Explains various operations and functions available in live view.
Customizing live view parameters like output interface and dwell time.
Steps to configure parameters for PTZ camera control.
How to set up presets, patrols, and patterns for PTZ camera movement.
Interface and methods to access the PTZ control panel.
Setting image quality, stream type, and resolution for recording.
Setting schedules for automatic recording based on time or events.
Setting up recording triggered by motion detection events.
Configuring recording based on external alarm inputs.
Recording triggered by Video Content Analysis events like intrusion detection.
Starting and stopping recording manually.
Methods to protect recording files from being overwritten.
General methods for playing back recorded video files.
Quickly playing back recent recorded video for a specific channel.
Searching and playing back files by channel and time using normal search.
Using smart search to find and play back video based on motion or intrusion events.
Searching and playing back video based on specific event types like alarm or VCA.
Procedures for backing up recorded video files to external devices.
Exporting record files quickly to a backup device.
Backing up files found through normal video search.
Backing up files based on event search criteria like alarm or motion.
Exporting specific video clips or captured pictures during playback.
Configuring motion detection zones and sensitivity for alarm triggers.
Configuring actions for external sensor alarms.
Setting up alarms for when video signal is lost from a camera.
Common issues and solutions for operating the NVR.
To Next Page
