
Do you have a question about the HIKVISION DS-7616NI-SE/P and is the answer not in the manual?
| Model | DS-7616NI-SE/P |
|---|---|
| Category | Network Video Recorder |
| Video Input | 16 Channels |
| Video Output | 1 HDMI, 1 VGA |
| Max Resolution (HDMI) | 4K (3840 × 2160) |
| Resolution (VGA) | 1920 × 1080 |
| Incoming Bandwidth | 160Mbps |
| Outgoing Bandwidth | 80Mbps |
| USB Interface | 2 × USB 2.0 |
| Operating Humidity | 10% to 90% |
| Synchronous Playback | 16 Channels |
| PoE | No |
| Decoding format | H.265/H.264/H.264+/MPEG4 |
| Compression | H.265/H.264 |
| HDD Slots | 2 Slots |
| SATA Interfaces | 2 |
| Network Interface | 1 × RJ45 10/100/1000 Mbps |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Working Temperature | -10°C to +55°C (14°F to 131°F) |
| Audio Input | 1 Channel |
| Audio Output | 1 Channel |
Details the physical interface and buttons on the front of the NVR.
Explains how to use the infrared remote control for device operation.
Describes how to use a USB mouse for navigation and control of the NVR.
Details the various ports and connectors located on the rear of the NVR.
Outlines correct procedures for powering the NVR on and off for longevity.
Guides setting a strong administrator password for initial device activation.
Explains the automated wizard for basic NVR configuration.
Covers activating and connecting IP cameras to the NVR system.
Provides an overview of the live view function and its icons.
Details operations and mouse controls available in live view mode.
Explains customization of live view parameters like output, dwell time, and audio.
Guides setting up parameters for PTZ camera control.
Covers setting up and calling custom camera positions, patrols, and movement patterns.
Describes the interface for controlling PTZ functions.
Details setting parameters for image quality and stream types for recording.
Explains setting up a schedule for automatic camera recording.
Outlines configuring motion detection to trigger recording and other actions.
Explains enabling redundant recording for enhanced data safety and reliability.
Covers searching and playing back recorded video files by channel, time, or event.
Details features like frame-by-frame playback, digital zoom, and multi-channel reverse playback.
Explains exporting record files using quick export, normal search, or event search.
Provides instructions for managing backup devices and format operations.
Guides configuring motion detection parameters and alarm response actions.
Details detecting video loss and configuring alarm responses.
Covers configuration of handling actions for various system exceptions.
Explains configuring various alarm response actions like event hints and audible warnings.
Covers basic network settings including IP address, gateway, and DNS.
Details advanced network configurations like EZVIZ Cloud P2P, DDNS, and PPPoE.
Explains testing network connectivity, delay, and packet loss.
Guides the essential process of initializing new hard disk drives for NVR use.
Covers adding and configuring NAS or IP SAN disks as network storage.
Explains grouping HDDs for organized storage and video recording.
Details allocating specific storage quotas for recorded files per camera.
Describes configuring on-screen display elements like date, time, and camera names.
Explains setting up privacy mask zones to block specific areas from view or recording.
Guides accessing system and device information for monitoring and diagnostics.
Details searching, viewing, and exporting system log files for troubleshooting.
Covers upgrading NVR firmware using backup devices or FTP.
Explains resetting NVR to factory default settings for troubleshooting or reconfiguration.
Details RS-232 serial port configuration for parameter transfer or transparent channel use.
Covers adding, deleting, and editing user accounts for system access control.
Provides definitions for technical terms used throughout the manual.
Offers solutions for common issues and problems encountered with the NVR.
Lists IP cameras that are compatible with the NVR system.











