Need help?Do you have a question about the HIKVISION DS-7108NI-Q1/M and is the answer not in the manual?
General| DC voltage | 12 V |
|---|---|
| Power supply type | DC |
| Power consumption (typical) | 10 W |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Video input channels | 8 channels |
| USB 2.0 ports quantity | 2 |
| VGA (D-Sub) output ports | 1 |
| Supported network protocols | TCP/IP, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, UPnP |
| Ethernet LAN | Yes |
| Ethernet interface type | Fast Ethernet |
| Maximum HDD capacity | 6000 GB |
| Video compression formats | H.264, H.265 |
Weight and Dimensions| Depth | 225 mm |
|---|---|
| Width | 260 mm |
| Height | 48 mm |
| Weight | 1000 g |
Guides through the initial activation process by setting an admin password.
Explains the various methods available for logging into the device.
Details the procedure for setting a custom unlock pattern for device access.
Covers controls and operations for Pan-Tilt-Zoom (PTZ) enabled cameras.
Guides on setting up specific parameters for PTZ camera functionality.
Explains how to play back recorded videos using standard playback controls.
Guides on accessing and viewing videos triggered by specific events like motion detection.
Explains how to search for recorded files based on various criteria like type, time, and channel.
Covers essential system settings such as date, time, and resolution in easy mode.
Details how to configure network settings for device connectivity and remote access.
Guides on setting up the Guarding Vision service for remote monitoring and management.
Covers the management of connected cameras, including adding and configuring them.
Details the process of adding and managing network IP cameras.
Configures intelligent event detection features like motion detection.
Defines the actions to be taken when specific alarms or events occur.
Configures storage devices, including initializing HDDs and adding network storage.
Sets up schedules for continuous and event-triggered video recording.
Sets recording parameters such as stream type, resolution, and bitrate.
Provides advanced system settings and configurations.
Covers network settings for device communication and remote access.
Configures the TCP/IP protocol suite for network connectivity.
Provides further details on configuring the Guarding Vision service.
Manages settings and configurations for connected cameras.
Details the process of adding and managing network IP cameras.
Manages event detection settings and associated actions.
Configures motion detection parameters and sensitivity for event triggering.
Sets up detection rules for objects crossing a virtual line in the camera's view.
Configures intrusion detection rules, areas, and sensitivity.
Sets up detection for objects entering a predefined virtual region.
Configures detection for objects exiting a predefined virtual region.
Sets up schedules for continuous and event-triggered video recording.
Sets recording parameters such as stream type, resolution, and bitrate.
Manages storage devices, including initializing HDDs and adding network storage.
To Next Page
