HIKVISION DS-7108NI-Q1/M User Manual

Go to Conguraon → Camera → Camera → PoE Binding Conguraon , and set the PoE channel
as your desire.
Figure 6-13 PoE Binding Conguraon
Import/Export IP Camera
Conguraon File
The informaon of added network camera can be generated into an excel le and exported to the
local device for backup, including the IP address, port, password of admin, etc. And the exported
le can be edited on your computer, like adding or deleng the content, and copy the seng to
other devices by imporng the excel le to it.
Before You Start
Connect a backup device, such as a USB ash drive, to your video recorder.
Steps
1. Go to
Conguraon → Camera → Camera → IP Channel .
2. Click Export/Import to export/import conguraon les to the connected backup device.
3. Set the storage device and folder path.
4. Click Export/Import.
What to do next
Aer the imporng process is completed, you must restart the video recorder.
Advanced
Sengs
Steps
1. Go to Conguraon → Camera → Camera → IP Channel .
2. Click More.
3.
Congure the parameters as your desire.
H.265 Auto Switch Conguraon
If you enable the opon, video recorder will automacally switch to H.265 stream for the
network camera (which supports H.265 video format) for the
inial access.
Upgrade
Network Video Recorder User Manual
51

HIKVISION DS-7108NI-Q1/M Specifications

General

DC voltage	12 V
Power supply type	DC
Power consumption (typical)	10 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Video input channels	8 channels
USB 2.0 ports quantity	2
VGA (D-Sub) output ports	1
Supported network protocols	TCP/IP, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, UPnP
Ethernet LAN	Yes
Ethernet interface type	Fast Ethernet
Maximum HDD capacity	6000 GB
Video compression formats	H.264, H.265

Weight and Dimensions

Depth	225 mm
Width	260 mm
Height	48 mm
Weight	1000 g