Need help?Do you have a question about the HIKVISION DS-7100NI-K1/W/M Series and is the answer not in the manual?
General| Video Output | 1 HDMI, 1 VGA |
|---|---|
| Wireless | No |
| Operating Humidity | 10% to 90% |
| Type | Network Video Recorder (NVR) |
| Channel Input | 4/8 channels |
| Video Compression | H.264, H.265, MJPEG |
| Max Resolution | Up to 8MP |
| Storage Capacity | Supports up to 6TB HDD |
| Network Interface | 1 RJ45 10M/100M/1000Mbps self-adaptive Ethernet port |
| Audio Input | 1 channel, RCA |
| Audio Output | 1 channel, RCA |
| Synchronous Playback | 4/8 channels |
| USB Interface | 2 x USB 2.0 |
| Power Supply | AC 100-240V, 50/60Hz |
| Operating Temperature | -10°C to +55°C (14°F to 131°F) |
| Weight | 1.5 kg |
| Model | DS-7100NI-K1/W/M Series |
Allows setting image quality parameters like stream type, resolution, and video encoding for recording.
Enables setting a schedule for automatic recording or capture based on time or events.
Details setting up motion detection to trigger recording or other alarm response actions.
Explains how to configure recording to be triggered by alarm inputs.
Covers configuring recording based on Video Content Analysis events like line crossing or intrusion.
Configures motion detection parameters, detection areas, sensitivity, and alarm response actions.
Enables detection of video loss for a channel and setting up alarm response actions.
Configures detection of video tampering and setting up alarm response actions.
Sets up detection of people, vehicles, or objects entering a virtual region and triggers alarm actions.
Configures detection of objects crossing a virtual line and sets alarm response actions.
Covers methods for upgrading the device firmware, using local backup devices or FTP.
Explains the process of resetting the admin password using a GUID file after losing access.
Explains how to control Pan, Tilt, and Zoom functions of PTZ cameras, including presets and patrols.
Explains how to back up record files using various search methods like normal, event, and video clips.
Includes configuration of DDNS, NTP Server, remote alarm host, multicast, RTSP, and email settings.
Explains the process of initializing a new hard disk drive before it can be used by the device.
Enables setting up alarms for HDD errors or abnormal statuses like 'Uninitialized' or 'Abnormal'.
To Next Page
