Network Video Recorder User Manual
vii
Safety Instruction
● Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or user.
● In the use of the product, you must be in strict compliance with the electrical safety regulations
of the nation and region. Please refer to technical specifications for detailed information.
● Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power
Source with 100 VAC to 240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer
to technical specifications for detailed information.
● Do not connect several devices to one power adapter as adapter overload may cause over-
heating or a fire hazard.
● Please make sure that the plug is firmly connected to the power socket.
● If smoke, odor or noise rises from the device, turn off the power at once and unplug the power
cable, and then please contact the service center.
To Next Page
Loading...
