Need help?Do you have a question about the HIKVISION DS-7732NI-I4 and is the answer not in the manual?
General| Playback modes | Pause, Play |
|---|---|
| Maximum resolution | 3840 x 2160 pixels |
| Alarm input channels | 16 |
| Video input channels | 32 channels |
| Alarm output channels | 4 |
| Video formats supported | H.264, H.265, MPEG4 |
| Resolution at capture speed | 1920x1080@60fps, 3840x2160@30fps |
| On/off switch | Yes |
| Product color | Black, Silver |
| Rack capacity | 1.5U |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| AC input voltage | 100 - 240 V |
| Power consumption (typical) | 20 W |
| RS-485 ports | 1 |
| USB 2.0 ports quantity | 2 |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| HDD capacity | - GB |
| HDD interface | Serial ATA |
| Maximum storage capacity | 24 TB |
| Number of HDDs installed | - |
| Total installed storage capacity | 12000 GB |
Weight and Dimensions| Depth | 390 mm |
|---|---|
| Width | 445 mm |
| Height | 70 mm |
Provides an overview of the device's front panel components and their functions.
Details the initial steps for powering up, shutting down, and activating the NVR.
Explains how to use various functions and controls during live view monitoring.
Covers the setup and configuration of Pan, Tilt, and Zoom camera controls.
Describes how to set up a schedule for recording and capturing events.
Guides users on how to search and play back recorded video files.
Details the configuration of motion detection alarms and associated actions.
Covers basic network configuration parameters like IP address and DNS.
Explains how to set up RAID arrays for data redundancy and storage.
Describes the process of preparing new hard disk drives for use with the NVR.
Shows how to access and view the NVR's system status and information.
Provides solutions for issues where the monitor shows no image after startup.
To Next Page
