Need help?Do you have a question about the HIKVISION DS-7732NI-I4/24P and is the answer not in the manual?
General| Brand | HIKVISION |
|---|---|
| Model | DS-7732NI-I4/24P |
| Category | Network Hardware |
| Language | English |
Explains the initial activation process, including setting an admin password.
Manages IP cameras by adding them manually or via network search.
Details manual steps to add network cameras to the device's connection list.
Displays real-time video images from connected cameras.
Configures presets, patrols, and patterns for PTZ camera control and automation.
Defines specific camera locations (presets) for quick access or event responses.
Moves the PTZ camera to a previously saved preset position.
Configures patrol paths for the PTZ camera, moving between key points with set durations.
Initiates a predefined patrol path for the PTZ camera.
Records and sets PTZ camera movement patterns for later playback.
Executes a recorded PTZ camera movement pattern.
Manages storage devices, including installing HDDs and adding network disks.
Provides instructions for installing a Hard Disk Drive into the device.
Adds network storage devices like NAS or IP SAN disks to the system.
Configures recording parameters for main stream, sub-stream, and picture settings.
Sets primary recording stream parameters affecting quality and image size.
Schedules automatic start/stop recording based on time and selected record types.
Enables saving records to both R/W and redundant HDDs for enhanced data safety.
Creates software-based disk arrays (RAID) for enhanced data redundancy and performance.
Enables the disk array (RAID) function on the device.
Creates a disk array using a simplified one-touch configuration process.
Manually creates RAID arrays (0, 1, 5, 6, 10) by selecting physical disks.
Plays back recorded video files using various methods like instant, normal, or smart search.
Sets schedules for when alarms or events are active, allowing up to eight time periods daily.
Configures actions for alarms: full screen, audible warning, notifications, email, outputs, PTZ.
Detects moving objects and triggers alarms, enabling recording or linkage actions.
Configures various linkage actions like full screen monitoring, audio warning, and email notifications.
Detects faces in the surveillance scene and triggers linkage actions upon detection.
Detects vehicles for traffic monitoring, capturing plates and sending alarm signals.
Detects objects crossing a virtual line in specified directions, triggering alarms and actions.
Detects objects entering or loitering in a predefined virtual region, triggering alarms and actions.
Detects objects entering a predefined virtual region and triggers alarms or actions.
Detects objects exiting a predefined virtual region and triggers alarms or actions.
Detects unattended objects left in a region, triggering alarms and actions.
Detects objects removed from a predefined region, triggering alarms and actions.
Detects abnormal sound changes (rise/decrease) in the surveillance scene.
Detects sudden changes in the surveillance environment, potentially caused by camera rotation.
Detects image blur caused by lens defocus, triggering alarms.
Detects intruders based on movement and heat energy within the detector's field of view.
Supports event detection for thermal cameras: fire, smoke, temperature detection.
Enables Hik-Connect for mobile and web access to manage the surveillance system remotely.
Sets up a hot spare device to take over tasks when a working device fails, enhancing system reliability.
Configures a working device to operate normally after a hot spare has taken over.
Manages the hot spare system by linking working devices to the hot spare for failover.
Manages user accounts, including adding, editing, deleting, and setting permissions.
Adds new user accounts with specified names, passwords, levels, and MAC addresses.
Modifies the admin user's account, including password, unlock pattern, and MAC address.
Edits information for operator or guest user accounts, including password and permissions.
Allows the admin user to delete operator or guest user accounts.
Assigns user permissions for local/remote operations and specific camera views.
Assigns specific permissions for local and remote operations to added users.
Grants non-admin users local live view permission for specific cameras.
Sets live view permissions for specific cameras when the device screen is locked.
Configures password security settings, including GUID export and security questions.
Exports a GUID file to help reset the admin password if forgotten.
Sets up security questions to aid in password recovery or security issue resolution.
Resets the admin password using GUID file import or security questions.
Resets the admin password by importing a GUID file from a USB flash disk.
Resets the admin password by answering configured security questions.
Upgrades device firmware using a local backup device or remote FTP server.
Upgrades device firmware using a file from a local backup device.
Upgrades device firmware using a file from a remote FTP server.
Provides solutions for common device issues like no image, audible warnings, or connection problems.
Solves issues where no image appears on the monitor after starting the device.
Addresses the audible warning sound that occurs after a new device starts up, usually related to HDD issues.
Troubleshoots IP camera connection issues, including version compatibility and network problems.
Resolves issues of live view freezing when outputting video locally via VGA/HDMI.
Troubleshoots live view freezing during remote access via web browser or platform software.
Solves issues where no record files are found on the local HDD, often related to time or search conditions.
To Next Page
