Network Video Recorder User Manual
159
15.2 Configure Hik-Connect
Purpose
Hik-Connect provides the mobile phone application and the service platform page
(www.hik-connect.com) to access and manage your connected encoder, which enables you to get a
convenient remote access to the surveillance system.
The Hik-Connect can be enabled via operation on SADP software, GUI and Web browser. We
introduce the operation steps on GUI in this section.
Step 1 Go to Configuration > Network > Advanced Settings > Platform Access.
Figure 15-3 Hik-Connect Settings
Step 2 Check Enable to activate the function. The Service Terms page pops up.
Figure 15-4 Service Terms
1) Create the verification code in the Verification Code text field.
2) Confirm the verification code.
3) Read Terms of Service and Privacy Policy before enabling the service.
4) Click OK to save the settings and return to the Hik-Connect page.
To Next Page
Loading...
Need help?
General
