Need help?Do you have a question about the HIKVISION DS-7716NXI-I4/16P/4S and is the answer not in the manual?
General| Model | DS-7716NXI-I4/16P/4S |
|---|---|
| Channel Input | 16 |
| Video Compression | H.265+/H.265/H.264+/H.264 |
| Max Resolution | 12MP |
| Incoming Bandwidth | 160 Mbps |
| Outgoing Bandwidth | 160 Mbps |
| Two-Way Audio | Yes |
| Decoding Format | H.265/H.264 |
| SATA | 4 |
| HDD Capacity | Up to 10TB per HDD |
| HDD Slots | 4 |
| Alarm Interface | Yes |
| PoE Interface | Yes |
| PoE Ports | 16 |
| PoE Standard | IEEE 802.3af/at |
| Power Consumption (without HDD) | ≤ 20W |
| Operating Humidity | 10% to 90% |
| Smart Search | Yes |
| Face Detection | Yes |
| Perimeter Protection | Yes |
| Video Metadata | Yes |
| ANR | Yes |
| HDD Health Management | Yes |
| Network Detection | Yes |
| VCA Alarm | Yes |
| IVS | Yes |
| People Counting | Yes |
| Heat Map | Yes |
| Category | Network Video Recorder |
| Audio Compression | G.711/G.726 |
| IP Video Input | 16 |
| VGA Output | 1 |
| Audio Output | 1 |
| Recording Resolution | 12MP/8MP/6MP/5MP/4MP/3MP/1080P/720P |
| Playback Resolution | 12MP/8MP/6MP/5MP/4MP/3MP/1080P/720P |
| Decoding Capability | 16 channels at 1080P |
| Network Interface | 1 RJ-45 10/100/1000 Mbps |
| USB Interface | 2 USB 2.0 |
| Alarm In/Out | 16/4 |
| Power Supply | AC 100-240V |
| Operating Temperature | -10°C to +55°C (14°F to 131°F) |
| Supported Protocols | TCP/IP, DHCP, DNS, NTP, SMTP, UPnP, HTTP, HTTPS |
| Compatible Cameras | HIKVISION IP cameras |
| Languages | Multiple languages |
| Certifications | CE, FCC |
| Synchronous Playback | 16 channels |
Details the indicators, USB port, and IR receiver on the NVR's front panel for easy identification.
Explains the various ports and connectors available on the NVR's rear for connectivity.
Guides on using the infrared remote control for basic device operation and navigation.
Provides essential steps for correctly powering on the NVR for the first time.
Covers setting an admin password and activating the NVR for initial use.
Details the process of logging into the NVR using pattern or password authentication.
Manages HDDs, network disks, and eSATA devices for storing video data.
Configures video quality, resolution, and bitrate settings for recording.
Sets up schedules for continuous, motion, or event-triggered recording.
Explains how to play recorded video files, including instant and tag file playback.
Details controlling playback, editing clips, and using playback interface features.
Sets up schedules for when event and alarm monitoring is active.
Defines actions triggered by alarms, like notifications or output signals.
Configures motion detection parameters, areas, and sensitivity.
Configures network parameters like IP address, subnet mask, and DNS for connectivity.
Guides on enabling remote access and management via the Hik-Connect service.
Provides solutions and guidance for resolving common issues and errors with the NVR.
To Next Page