DS-77xxNXI-I4/16P/4S NVR User Manual
UM DS-77xxNXI-I4/16P/4S 050619NA 76
6. Select POS Event recording type.
7. Set the POS event triggered recording schedule. Refer to
Chapter 7.4 Configure Recording Schedule
.
7.10 Configure Picture Capture
Picture refers to live picture capture in continuous or event recording type.
1. Go to Camera > Encoding Parameters > Capture.
2. Set the picture parameters.
•
Resolution: Set the resolution of the picture to capture.
•
Picture Quality: Set the picture quality to low, medium or high.
•
Interval: The interval of capturing live picture.
3. Go to Storage > Capture Schedule.
4. Select the camera to configure the picture capture.
Figure 7-10 Set Picture Capture Schedule
5. Set the picture capture schedule. Refer to Chapter 7.4 Configure Recording Schedule for details.
To Next Page
Loading...
