DS-77xxNXI-I4/16P/4S NVR User Manual
UM DS-77xxNXI-I4/16P/4S 050619NA 59
6.3.3
Set a Patrol
Purpose
Patrols can be set to move the PTZ to different key points and have it stay there for a set duration before
moving on to the next key point. The key points correspond to presets.
1. Click on the quick settings toolbar of the PTZ camera live view. The PTZ control panel displays on
the right of the interface.
2. Click Patrol to configure a patrol.
Figure 6-7 Patrol Configuration
3. Select the patrol no. in the text field.
4. Click Set to enter the Patrol Settings interface.
Figure 6-8 Patrol Settings
5. Click to add a key point for the patrol.
To Next Page
Loading...
