HIKVISION DS-7716NXI-I4/16P/4S - Set PTZ Presets, Patrols, and Patterns; Set a Preset

DS-77xxNXI-I4/16P/4S NVR User Manual
UM DS-77xxNXI-I4/16P/4S 050619NA 57
Figure 6-2 PTZ Parameters Settings
3. Edit the PTZ camera parameters.
All the parameters should be exactly match the PTZ camera parameters.
4. Click OK to save the settings.
6.3 Set PTZ Presets, Patrols, and Patterns
Before You Start
Make sure that the presets, patrols, and patterns are supported by PTZ protocols.
6.3.1 Set a Preset
Purpose
Follow these steps to set the preset location you want the PTZ camera to point to when an event occurs.
1. Click on the quick settings toolbar of the PTZ camera live view. The PTZ control panel displays on
the right of the interface.
2. Use the directional buttons on the PTZ control panel to wheel the camera to the location where you
want to set the preset. The zoom and focus operations can be recorded in the preset as well.
3. Click in the lower right corner of live view to set the preset.