DS-77xxNXI-I4/16P/4S NVR User Manual
UM DS-77xxNXI-I4/16P/4S 050619NA 82
Table 8-1 Create Array
3. Enter the array name.
4. Select RAID Level as RAID 0, RAID 1, RAID 5, RAID 6, or RAID 10 as required.
5. Select the physical disks to constitute the array.
Table 8-2 Required Number of HDD
The number of HDDs must be an even range from 4 to 16
6. Click OK.
7. Optionally, the device will automatically initialize the created array. Go to Storage > RAID Setup > Array
to view the created arrray’s information.
Figure 8-3 Array List
8.2 Rebuild Array
Purpose
The array status includes Functional, Degraded, and Offline. To ensure high security and reliability of the
data stored in an array, take immediate and proper maintenance of the arrays according to their status.
To Next Page
Loading...
