DS-77xxNXI-I4/16P/4S NVR User Manual
UM DS-77xxNXI-I4/16P/4S 050619NA 119
2. Click Vehicle.
Figure 12-3 Vehicle Detection
3. Select a Camera to configure.
4. Check Enable Vehicle Detection.
5. Optionally, check Save VCA Picture to save the captured pictures of vehicle detection.
6. Set the arming schedule. Refer to
Chapter 11.1 Configure Arming Schedule
.
7. Set the linkage actions. Refer to
Chapter 11.2 Configure Alarm Linkage Actions
.
8. Configure rules, including Area Settings, Picture, Overlay Content, and Blacklist and Whitelist. Area
Settings: Up to four lanes are selectable.
9. Click Save.
Refer to the network camera user manual for detailed vehicle detection instructions.
12.4 Line Crossing Detection
Purpose
Line crossing detection detects people, vehicles, and objects crossing a set virtual line. The detection
direction can be set as bidirectional, from left to right, or from right to left.
To Next Page
Loading...
