HIKVISION DS-7716NXI-I4/16P/4S - Call a Patrol; Set a Pattern

DS-77xxNXI-I4/16P/4S NVR User Manual
UM DS-77xxNXI-I4/16P/4S 050619NA 61
6.3.4 Call a Patrol
Purpose
Calling a patrol makes the PTZ move according to the predefined patrol path.
1. Click on the quick settings toolbar of the PTZ camera live view. The PTZ control panel displays on
the right of the interface.
2. Click Patrol on the PTZ control panel.
Figure 6-11 Patrol Configuration
3. Select a patrol in the text field.
4. Click Call to call it.
5. (Optional) Click Stop to stop calling it.
6.3.5 Set a Pattern
Purpose
Patterns can be set by recording the PTZ movement. You can call the pattern to make the PTZ move
according to the predefined path.
1. Click on the quick settings toolbar of the PTZ camera live view. The PTZ control panel displays on
the right of the interface.
2. Click Pattern to configure the pattern.
Figure 6-12 Pattern Configuration
3. Select the pattern no. in the text field.
4. Set the pattern.
1) Click Record to start recording.