Need help?Do you have a question about the HIKVISION DS-7732NI-E4 and is the answer not in the manual?
General| Maximum frame rate | 60 fps |
|---|---|
| Maximum resolution | 1920 x 1080 pixels |
| Alarm input channels | 16 |
| Video input channels | 32 channels |
| Alarm output channels | 4 |
| HDMI output | Yes |
| Audio RCA inputs | 1 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Ethernet LAN (RJ-45) ports | 2 |
| HDD interface | Serial ATA |
| Maximum storage capacity | 24 TB |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 20 W |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Depth | 390 mm |
|---|---|
| Width | 445 mm |
| Height | 70 mm |
| Weight | 4000 g |
Provides step-by-step instructions for powering the NVR on and off.
Guides on setting the initial administrative password for security.
Explains how to add and connect IP cameras to the NVR.
Guides on configuring motion detection alarms and response actions.
Explains how to configure handling actions for external sensor alarms.
Covers configuring handling actions for various system exceptions.
Details configuring actions like event hints, audible warnings, and notifications.
Explains configuring face detection alarms and rules.
Guides on configuring vehicle detection alarms and rules.
Details configuring line crossing detection alarms and rules.
Explains configuring intrusion detection alarms and rules.
Covers basic network configurations like IP address and working mode.
Covers advanced network settings like PPPoE and HIK Cloud P2P.
Guides on configuring Dynamic DNS for network access.
Provides steps for initializing newly installed hard disk drives.
To Next Page
