Need help?Do you have a question about the HIKVISION DS-7716NI-K4 and is the answer not in the manual?
General| Audio system | 2-way |
|---|---|
| Input bandwidth | 160 Mbit/s |
| Maximum frame rate | 30 fps |
| Maximum resolution | 4096 x 2160 pixels |
| Alarm input channels | 16 |
| Video input channels | 16 channels |
| Alarm output channels | 4 |
| Supported resolutions | 4096 x 2160, 3840 x 2160, 2560 x 1440, 1920 x 1080, 1600 x 1200, 1280 x 1024, 1280 x 720 |
| Audio formats supported | G.711 A-law, G.711 μ-law, G.726 |
| Video formats supported | H.264, H.264+, H.265, H.265+, MPEG4 |
| RS-232 ports | 1 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Ethernet LAN (RJ-45) ports | 2 |
| Supported network protocols | TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP, HTTP, HTTPS |
| HDD capacity | - GB |
| HDD interface | SATA |
| Maximum storage capacity | 8 TB |
| Number of HDDs installed | 0 |
| Certification | FCC Part 15 Subpart B, ANSI C63.4-2014 CE EN 55032: 2015, EN 61000-3-2, EN 61000-3-3, EN 50130-4, EN 55035: 2017 |
| Product color | Black |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 20 W |
| Wi-Fi | No |
Weight and Dimensions| Depth | 400 mm |
|---|---|
| Width | 445 mm |
| Height | 71 mm |
| Weight | 5000 g |
Covers procedures for starting up and shutting down the NVR, including rebooting.
Guides through the initial device activation process, including setting an admin password.
Details the process of resetting the admin password using a GUID file.
Guides through initial NVR setup using the wizard, including network and RAID.
Covers activating IP cameras and adding them to the NVR via various methods.
Guides on setting PTZ parameters such as baud rate and protocol.
Details how to customize and call PTZ presets, patrols, and patterns.
Covers setting stream type, resolution, video encoding, and advanced recording options.
Explains how to set schedules for recording and capture, including event triggers.
Details setting up motion detection areas, sensitivity, and trigger actions.
Covers setting alarm input parameters and configuring alarm-triggered recording.
Explains how to configure recording triggered by VCA events like face or vehicle detection.
Covers locking recording files and setting HDD property to Read-only.
Details methods for playback, including instant, normal search, and by time.
Details quick export, backup by normal search, and backup by event search.
Guides on configuring motion detection areas, sensitivity, and arming schedules.
Details actions like Event Hint, Full Screen Monitoring, Audible Warning, and Email.
Details setting up face detection rules, sensitivity, and saving captured pictures.
Covers vehicle detection, license plate capture, and rule settings for lanes.
Explains setting up virtual lines, direction, sensitivity, and drawing rules.
Details setting intrusion detection thresholds, sensitivity, percentage, and drawing regions.
Covers configuring detection for objects entering a pre-defined virtual region.
Details searching for captured face pictures and related video files.
Covers searching for suspicious behavior based on VCA detection results.
Allows searching and viewing matched vehicle plate pictures and related information.
Covers configuring NIC type, IP address, gateway, DNS, and working modes.
Details enabling RAID, one-touch, and manual array creation for DS-9600NI-I8/I16.
Guides on initializing newly installed HDDs before they can be used with the NVR.
Covers S.M.A.R.T. self-evaluation and bad sector detection for HDD reliability.
Details setting up privacy mask zones to block specific surveillance areas.
Explains upgrading firmware via local backup device or remote FTP server.
Covers restoring factory defaults for parameters, network, and device status.
Offers solutions for common problems like no display, audible warnings, and camera issues.
To Next Page
