Need help?Do you have a question about the HIKVISION DS-7716NI-K4/16P and is the answer not in the manual?
General| Input bandwidth | 160 Mbit/s |
|---|---|
| Maximum resolution | 4096 x 2160 pixels |
| Alarm input channels | 16 |
| Video input channels | 16 channels |
| Alarm output channels | 4 |
| Supported resolutions | 4096 x 2160, 3840 x 2160, 2560 x 1440, 1920 x 1080, 1600 x 1200, 1280 x 1024, 1280 x 720 |
| Audio formats supported | G.711 A-law, G.711 μ-law, G.726 |
| Video formats supported | H.264, H.264+, H.265, H.265+, MPEG4 |
| HDD capacity | - GB |
| HDD interface | SATA |
| Maximum storage capacity | 8 TB |
| Number of HDDs installed | 0 |
| Networking standards | IEEE 802.3af, IEEE 802.3at |
| USB 2.0 ports quantity | 2 |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Power over Ethernet (PoE) | Yes |
| Ethernet LAN (RJ-45) ports | 1 |
| Supported network protocols | TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP, HTTP, HTTPS |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 20 W |
| Total Power over Ethernet (PoE) budget | 200 W |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Certification | FCC Part 15 Subpart B, ANSI C63.4-2014 CE EN 55032: 2015, EN 61000-3-2, EN 61000-3-3, EN 50130-4, EN 55035: 2017 |
| Product color | Black |
| Wi-Fi | No |
Weight and Dimensions| Depth | 400 mm |
|---|---|
| Width | 445 mm |
| Height | 75 mm |
| Weight | 5000 g |
Explains network interface configurations, protocols, and remote access features.
Covers the procedures for safely starting, shutting down, and activating the NVR device.
Details the process of activating, adding, and connecting IP cameras to the NVR.
Guides users through setting up PTZ parameters before controlling PTZ cameras.
Explains how to customize and manage PTZ presets, patrols, and patterns for automated camera movements.
Explains how to set recording and capture schedules for cameras based on time and event triggers.
Guides on setting up motion detection parameters, areas, sensitivity, and response actions.
Describes how to configure recording or capture triggered by external alarm inputs.
Covers the setup of recording triggered by Video Content Analysis (VCA) events.
Details various methods for searching and playing back recorded video files, including instant, normal, and event searches.
Covers quick export, backup by normal search, event search, and backup of video clips or captured pictures.
Covers the setup of motion detection parameters, areas, sensitivity, and response actions.
Explains how to configure handling actions for external sensor alarms.
Details the configuration for detecting video loss and setting alarm response actions.
Covers setting up video tampering detection and configuring response actions.
Explains how to configure handling actions for various system exceptions like HDD errors or network disconnection.
Details how to configure actions like event hints, full-screen monitoring, audible warnings, email alerts, and alarm outputs.
Details how to configure face detection parameters, sensitivity, and response actions.
Covers the setup for detecting vehicles and capturing license plates, including rule settings.
Explains how to configure rules for detecting objects crossing a virtual line, including direction and sensitivity.
Details the setup for detecting objects entering or loitering in a predefined virtual region.
Covers configuring rules for detecting objects entering a predefined virtual region.
Explains how to configure rules for detecting objects exiting a predefined virtual region.
Details the setup for detecting unattended objects left in a predefined region.
Covers the configuration for detecting objects removed from a predefined region.
Explains how to configure detection for abnormal audio events like sudden sound changes.
Details the setup for detecting changes in the surveillance environment.
Explains RAID array creation through one-touch or manual configuration.
Details the process of initializing newly installed HDDs before they can be used.
Explains how to set up privacy mask zones to block specific surveillance areas from view or recording.
Offers solutions for common issues encountered with the NVR, such as display problems or HDD errors.
To Next Page
