Need help?Do you have a question about the HIKVISION DS-7732NXI-K4/16P and is the answer not in the manual?
General| Model | DS-7732NXI-K4/16P |
|---|---|
| Category | Network Hardware |
| Video Input Channels | 32 |
| IP Video Input | 32 |
| VGA Output Resolution | 1920×1080 |
| Decoding Format | H.265+/H.265/H.264+/H.264 |
| Two-Way Audio | Yes |
| HDD Slots | 16 |
| Incoming Bandwidth | 320 Mbps |
| Outgoing Bandwidth | 160 Mbps |
| Alarm In/Out | 16/4 |
| PoE | Yes |
| Operating Humidity | 10% to 90% |
| Operating System | Embedded LINUX |
| Video Output | HDMI, VGA |
| HDMI Output Resolution | 4K (3840 × 2160) |
| Max Resolution | 12 MP |
| Recording Resolution | Up to 8 MP |
| Audio Input | 16-ch |
| Audio Output | 1-ch (RCA) |
| Storage Capacity | Up to 10 TB capacity for each HDD |
| Network Interface | 10/100/1000 Mbps |
| USB Interface | 1 × USB 3.0 |
| PoE Standard | IEEE 802.3af/802.3at |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Operating Temperature | -10°C to +55°C (14°F to 131°F) |
Guides through the initial activation process, including password and resolution setup.
Explains how to log in using unlock pattern or password.
Details the steps for logging in using a graphical unlock pattern.
Describes the process of logging in with a username and password.
Covers controlling PTZ (Pan, Tilt, Zoom) cameras, including parameter configuration.
Details how to set up PTZ camera parameters before controlling the camera.
Guides on how to play back recorded videos using the calendar and playback controls.
Details how to search and play back videos containing specific event information.
Covers basic system settings like language, time, and user management.
Details network settings, including DHCP, DNS, and Hik-Connect setup.
Explains how to connect and manage devices via the Hik-Connect platform.
Covers adding and managing network cameras, including IP camera settings.
Details how to add and manage connected devices like switches and IP speakers.
Details motion detection setup, including area, sensitivity, and target detection.
Covers storage device initialization and recording schedule configuration.
Covers advanced system settings like device name, lock screen, and decoding modes.
Covers advanced network settings such as TCP/IP, DDNS, NAT, and NTP.
Covers adding and managing network cameras, including automatic search and manual addition.
Details methods for adding network cameras, including by device password and manually.
Introduces event configurations, including normal events like motion detection.
Covers perimeter protection features like line crossing and intrusion detection.
Explains facial recognition and face capture functionalities.
Explains how to configure alarm linkage actions like pop-up windows and buzzer alarms.
Details recording parameters, schedules, and storage device configuration.
Covers scheduled reboots, camera upgrades, and device status checks.
Covers local and online firmware upgrade procedures.
Details the process of logging into the web interface using a browser.
To Next Page