HIKVISION DS-7732NXI-K4/16P User Manual

Figure 6-20 Face Capture
2.
Select Camera.
3.
Turn on Enable.
4.
Adjust
Sensivity.
Sensivity
The higher the value is, the more easily the defocus image can trigger the alarm.
5.
Set the arming schedule. Refer to Congure Arming Schedule for details.
6.
Set the linkage
acons. Refer to Congure Alarm Linkage Acon for details.
7.
Click Apply.
Face Picture Comparison
Face picture comparison compares the detected face pictures with face pictures in the face picture
library. The device will trigger an alarm when comparison succeeded.
Before You Start
Ensure you have created at least one face picture library, and face pictures are added to the library.
Refer to
Face Picture Library Management for operaon details.
Steps
1.
Go to Conguraon → Facial Recognion → Face Picture Comparison .
Network Video Recorder User Manual
73

HIKVISION DS-7732NXI-K4/16P Specifications

General

Model	DS-7732NXI-K4/16P
Category	Network Hardware
Video Input Channels	32
IP Video Input	32
VGA Output Resolution	1920×1080
Decoding Format	H.265+/H.265/H.264+/H.264
Two-Way Audio	Yes
HDD Slots	16
Incoming Bandwidth	320 Mbps
Outgoing Bandwidth	160 Mbps
Alarm In/Out	16/4
PoE	Yes
Operating Humidity	10% to 90%
Operating System	Embedded LINUX
Video Output	HDMI, VGA
HDMI Output Resolution	4K (3840 × 2160)
Max Resolution	12 MP
Recording Resolution	Up to 8 MP
Audio Input	16-ch
Audio Output	1-ch (RCA)
Storage Capacity	Up to 10 TB capacity for each HDD
Network Interface	10/100/1000 Mbps
USB Interface	1 × USB 3.0
PoE Standard	IEEE 802.3af/802.3at
Power Supply	100-240 VAC, 50/60 Hz
Operating Temperature	-10°C to +55°C (14°F to 131°F)