DS-77xxNXI-I4/16P/4S NVR User Manual
UM DS-77xxNXI-I4/16P/4S 050619NA 52
Figure 5-3 Live View-General
2. Configure the live view parameters.
•
Video Output Interface: Select the video output to configure.
•
Live View Mode: Select the display mode for live view, e.g., 2*2, 1*5, etc.
•
Dwell Time: The time in seconds to wait between switching cameras when enabling auto-switch in
Live View.
•
Enable Audio Output: Enable/disable audio output for the selected video output.
•
Volume: Adjust the volume of live view, playback and two-way audio for the selected output interface.
•
Event Output: Select the output to show event video.
•
Full Screen Monitoring Dwell Time: Set the time in seconds to show alarm event screen.
3. Click OK to save the settings.
5.3 Configure Live View Layout
1. Go to System > Live View > View Settings.
To Next Page
Loading...
