DS-77xxNXI-I4/16P/4S NVR User Manual
UM DS-77xxNXI-I4/16P/4S 050619NA 108
A higher value more readily triggers motion detection.
6. Set the arming schedule. Refer to
Chapter 11.1 Configure Arming Schedule
.
7. Set the linkage actions. Refer to
Chapter 11.2 Configure Alarm Linkage Actions
.
11.4 Configure Video Loss Alarm
Purpose
Video loss detection detects video loss of a channel and takes alarm response action(s).
1. Go to System > Event > Normal Event > Video Loss.
Figure 11-5 Set Video Loss Detection
2. Select the camera to configure the video loss detection.
3. Check Enable.
4. Set the arming schedule. Refer to
Chapter 11.1 Configure Arming Schedule
.
5. Set the linkage actions. Refer to
Chapter 11.2 Configure Alarm Linkage Actions
.
To Next Page
Loading...
